History

William Clark eb81b5225d README		2024-01-01 13:34:11 +00:00
..
adc.c	adc and temp sense example	2024-01-01 13:27:55 +00:00
double-click.c	double click	2024-01-01 13:08:06 +00:00
fifo.c	single-click detection & fixed examples	2024-01-01 12:05:53 +00:00
interrupts.c	single-click detection & fixed examples	2024-01-01 12:05:53 +00:00
README.md	README	2024-01-01 13:34:11 +00:00
simple.c	single-click detection & fixed examples	2024-01-01 12:05:53 +00:00
single-click.c	double click	2024-01-01 13:08:06 +00:00
temp.c	adc and temp sense example	2024-01-01 13:27:55 +00:00

README.md

lis3dh/example

simple.c

Basic example of how to use this device

fifo.c

Instead of polling for every single [x y z] set, a FIFO with programmable capacity ("watermark") can be used, and then dumped into memory once full.

All FIFO readings use 10-bit resolution regardless of the mode set in lis.cfg.mode.

The watermark level can be adjusted to a value [0-31] by modifying the lis.cfg.fifo.fth property before calling lis3dh_configure().

The LIS3DH can optionally apply a HP filter on the sample data. It can be used to greatly reduce the "DC acceleration" present.

interrupts.c

This device supports two different interrupt "output pins," INT1 and INT2. The appropriate flag must be set in either cfg.pin1 or cfg.pin2 and the interrupt source must be configured to trigger into INT1 or INT2. This file contains example code that listens and receives an interrupt when the FIFO watermark is reached i.e. it is full.

single-click.c

Set up single-click detection

double-click.c

Set up double-click detection

adc.c

Enable and read built-in ADCs.

Input range: 800 mV to 1600 mV

Resolution: 8-bit in LP mode, 10-bit in normal and in HR mode.

Sampling frequency: same as ODR

temp.c

Enable and read built-in temperature sensor

Operating range: -40 to 85°C

Step size: ±1°C