# lis3dh/example ### simple.c Basic example of how to use this device ### fifo.c Instead of polling for every single [x y z] set, a FIFO with programmable capacity ("watermark") can be used, and then dumped into memory once full. All FIFO readings use 10-bit resolution regardless of the mode set in `lis.cfg.mode`. The watermark level can be adjusted to a value [0-31] by modifying the `lis.cfg.fifo.fth` property before calling `lis3dh_configure()`. The LIS3DH can optionally apply a HP filter on the sample data. It can be used to greatly reduce the "DC acceleration" present. ### interrupts.c This device supports two different interrupt "output pins," `INT1` and `INT2`. The appropriate flag must be set in either `cfg.pin1` or `cfg.pin2` and the interrupt source must be configured to trigger into `INT1` or `INT2`. This file contains example code that listens and receives an interrupt when the FIFO watermark is reached i.e. it is full. ### single-click.c Set up single-click detection ### double-click.c Set up double-click detection ### adc.c Enable and read built-in ADCs. > - Input range: 800 mV to 1600 mV > - Resolution: 8-bit in LP mode, 10-bit in normal and in HR mode. > - Sampling frequency: same as ODR ### temp.c Enable and read built-in temperature sensor > - Operating range: -40 to 85°C > - Step size: ±1°C