99 lines
3.7 KiB
TeX
99 lines
3.7 KiB
TeX
|
|
\abstract{ This chapter defines what is meant by the terms
|
|
components, component fault modess and `unitary~state' component fault modes.
|
|
Mathematical constraints and definitions are made using set theory.
|
|
}
|
|
|
|
|
|
\section{Introduction}
|
|
When building a system from components,
|
|
we should be able to find all known failure modes for each component.
|
|
For most common electrical and mechanical components, the failure modes
|
|
for a given type of part can be obtained from standard literature\cite{mil1991}
|
|
\cite{mech}. %The failure modes for a given component $K$ form a set $F$.
|
|
|
|
An important factor in defining a failure mode is that they
|
|
should be as clearly defined as possible.
|
|
%
|
|
It should not be possible for instance for
|
|
a component to have two or more failure modes active at once.
|
|
Should this be the case, the failure modes have not been clearly analysed.
|
|
The combination could be represented by a new failure mode, or
|
|
the component should be re-analysed. A set of failure modes where only one fault mode
|
|
can be active at a time is termed a `unitary~state' failure mode set.
|
|
|
|
We can define a function $FM()$ to
|
|
take a given component $K$ and return its set of failure modes $F$.
|
|
|
|
$$ FM : K \mapsto F $$
|
|
|
|
We can further define a set $U$ which is a set of sets of failure modes, where
|
|
the component failure modes in each of its members are unitary~state.
|
|
Thus if the failure modes of $F$ are unitary~state, we can say $F \in U$.
|
|
|
|
|
|
\subsection{Component failure modes : Unitary State example}
|
|
|
|
A component with simple ``unitary~state'' failure modes is the electrical resistor.
|
|
|
|
Electrical resistors can fail by going OPEN or SHORTED.
|
|
However they cannot fail with both conditions active. The conditions
|
|
OPEN and SHORT are mutually exlusive.
|
|
Because of this the failure mode set $F=FM(R)$ is `unitary~state'.
|
|
%A more complex component, say a micro controller could have several
|
|
%faults active. It could for instance have a broken I/O output
|
|
%and an unstable ADC input. Here the faults cannot be considered `unitary~state'.
|
|
|
|
% A set of failure modes, where only one or no failure modes
|
|
% are active is termed an `unitary~state' failure mode set. This
|
|
% will be donoted as set $A$.
|
|
%
|
|
To define `unitary~state' using set theory we can define a function
|
|
`active'.
|
|
The function $active(f)$ deontes that the failure mode $f$ (where $f$ is an element of $F$) is currently active.
|
|
|
|
Thus for the set $F$ to exist in $U$ the following condition must be true.
|
|
|
|
\begin{equation}
|
|
\label{unitarystate_def}
|
|
F \in U | f \in F \wedge active(f) \wedge f1 \in \wedge \neq f \wedge \neg active(f1)
|
|
\end{equation}
|
|
|
|
As an example the resistor $R$
|
|
has two failure modes $R_{open}$ and $R_{shorted}$.
|
|
|
|
$$ FM(R) = F = \{ R_{open}, R_{shorted} \} $$
|
|
|
|
Applying equation \ref{`unitarystate'_definition} to a resistor
|
|
for both fault modes
|
|
|
|
$$ active(R_{short}) | R_{short} \in F \wedge R_{open} \in F \wedge R_{open} \neq R_{short} \wedge \neg active(R_{open}) $$
|
|
$$ active(R_{open}) | R_{open} \in F \wedge R_{short} \in F \wedge R_{short} \neq R_{open} \wedge \neg active(R_{short}) $$
|
|
|
|
For the case of the resistor with only two failure modes the results above, being true,
|
|
show that the failure modes for a resistor of $ F = \{ R_{open}, R_{shorted} \} $ are `unitary~state'
|
|
component failure modes.
|
|
|
|
Thus
|
|
$$ FM(R) = \{ R_{open}, R_{shorted} \} \in U $$
|
|
|
|
|
|
A general case can be stated by taking equation \ref{unitary_state_def} and making it a function thus.
|
|
|
|
|
|
\begin{equation}
|
|
\label{`unitarystate'_def}
|
|
UnitaryState(F) = \forall f \in F | active(f) \wedge f1 \in F \wedge f1 \neq f \wedge \neg active(f1)
|
|
\end{equation}
|
|
|
|
%Which can be written
|
|
|
|
%$$ UnitaryState(FM(K)) $$
|
|
|
|
|
|
|
|
% should this be a paragraph in Symptom Abstraction ????
|
|
|
|
|
|
|