From da4666ca784b2ac80fcae08b1aac8bb80d18bcf3 Mon Sep 17 00:00:00 2001 From: Robin Clark Date: Sat, 25 Jun 2011 13:51:28 +0100 Subject: [PATCH] Trying to get this into six pages --- .../System_safety_2011/submission.tex | 435 +++---- .../style_sheets/IEEE/bare_adv.tex | 1100 +++++++++++++++++ .../style_sheets/IEEE/bare_conf.tex | 601 +++++++++ .../style_sheets/IEEE/bare_jrnl.tex | 745 +++++++++++ 4 files changed, 2669 insertions(+), 212 deletions(-) create mode 100755 related_papers_books/style_sheets/IEEE/bare_adv.tex create mode 100755 related_papers_books/style_sheets/IEEE/bare_conf.tex create mode 100755 related_papers_books/style_sheets/IEEE/bare_jrnl.tex diff --git a/fmmd_concept/System_safety_2011/submission.tex b/fmmd_concept/System_safety_2011/submission.tex index 4fa8c02..faa29fb 100644 --- a/fmmd_concept/System_safety_2011/submission.tex +++ b/fmmd_concept/System_safety_2011/submission.tex @@ -1,5 +1,5 @@ - \documentclass[twocolumn]{article} -%\documentclass[a4paper,10pt]{report} +\documentclass[twocolumn]{article} +%\documentclass[twocolumn,10pt]{report} \usepackage{graphicx} \usepackage{fancyhdr} \usepackage{tikz} @@ -10,7 +10,7 @@ \usepackage{lastpage} \usetikzlibrary{shapes,snakes} \newcommand{\tickYES}{\checkmark} - +\date{} %\newboolean{paper} %\setboolean{paper}{true} % boolvar=true or false @@ -32,14 +32,14 @@ \newcommand{\pic}{\em pair-wise~intersection~chain} \newcommand{\wrt}{\em with~respect~to} \newcommand{\abslevel}{\ensuremath{\Psi}} -\newcommand{\fmmdgloss}{\glossary{name={FMMD},description={Failure Mode Modular De-Composition, a bottom-up methodolgy for incrementally building failure mode models, using a procedure taking functional groups of components and creating derived components representing them, and in turn using the derived components to create higher level functional groups, and so on, that are used to build a failure mode model of a SYSTEM}}} +\newcommand{\fmmdgloss}{\glossary{name={FMMD},description={Failure Mode Modular De-Composition, a bottom-up methodolgy for incrementally building failure mode models, using a procedure taking functional groups of components and creating derived components representing them, and in turn using the derived components to create higher level functional groups, and so on, that are used to build a failure mode model of a system}}} \newcommand{\fmodegloss}{\glossary{name={failure mode},description={The way in which a failure occurs. A component or sub-system may fail in a number of ways, and each of these is a failure mode of the component or sub-system}}} -\newcommand{\fmeagloss}{\glossary{name={FMEA}, description={Failure Mode and Effects analysis (FMEA) is a process where each potential failure mode within a SYSTEM, is analysed to determine SYSTEM level failure modes, and to then classify them {\wrt} perceived severity}}} +\newcommand{\fmeagloss}{\glossary{name={FMEA}, description={Failure Mode and Effects analysis (FMEA) is a process where each potential failure mode within a system, is analysed to determine system level failure modes, and to then classify them {\wrt} perceived severity}}} \newcommand{\frategloss}{\glossary{name={failure rate}, description={The number of failure within a population (of size N), divided by N over a given time interval}}} \newcommand{\pecgloss}{\glossary{name={PEC},description={A Programmable Electronic controller, will typically consist of sensors and actuators interfaced electronically, with some firmware/software component in overall control}}} \newcommand{\bcfm}{base~component~failure~mode} -\def\layersep{2.0cm} +\def\layersep{1.8cm} \newboolean{pld} \setboolean{pld}{false} % boolvar=true or false : draw analysis using propositional logic diagrams @@ -49,15 +49,15 @@ failure mode of the component or sub-system}}} \begin{document} -\pagestyle{fancy} -\fancyhf{} -\fancyhead[LO]{} -\fancyhead[RE]{\leftmark} +%\pagestyle{fancy} +%\fancyhf{} +%\fancyhead[LO]{} +%\fancyhead[RE]{\leftmark} -\cfoot{Page \thepage\ of \pageref{LastPage}} -\rfoot{\today} +%\cfoot{Page \thepage\ of \pageref{LastPage}} +%\rfoot{\today} %\lhead{Developing a rigorous bottom-up modular static failure mode modelling methodology} -\lhead{Developing a rigorous bottom-up modular static failure modelling methodology} +%\lhead{Developing a rigorous bottom-up modular static failure modelling methodology} % numbers at outer edges \pagenumbering{arabic} % Arabic page numbers hereafter \author{R.P.Clark$^\star$ , A.~Fish$^\dagger$ , C.~Garrett$^\dagger$, J.~Howse$^\dagger$ \\ @@ -69,8 +69,9 @@ failure mode of the component or sub-system}}} %\nodate \maketitle +\paragraph{Keywords:} FMMD FTA FMEA static failure mode modelling safety critical -\abstract{ +\abstract{ \em { The certification process of safety critical products for European and other international standards often demand environmental stress, endurance and Electro Magnetic Compatibility (EMC) testing. Theoretical, or 'static testing', @@ -79,18 +80,19 @@ improve the product safety, or identify theoretical weaknesses in the design. This paper proposes a new theoretical methodology for creating failure mode models of % safety critical i systems. It has a common notation for mechanical, electronic and software domains and is modular and hierarchical. -These properties provide advantages in rigour and efficiency when compared to current methodologies. +The method provide advantages in rigour and efficiency when compared to current methodologies. +} } -\paragraph{Introduction} +\section{Introduction} { This paper describes and appraises four current failure modelling methodologies. Their advantages and deficiencies are discussed and a desirable criteria list for an `ideal' static failure mode methodology is developed. -A new proposed +A proposed methodology is then described. % and discussed. A worked example is then presented, using the new methodology, which models the failure mode -behaviour of a non inverting op-amp circuit. +behaviour of a non-inverting op-amp circuit. Using the worked example the new methodology is evaluated. Finally the desirable criteria list is presented as a check box table alongside the four current methodologies. @@ -112,7 +114,8 @@ It is suitable for large complicated systems with few undesirable top level failures and focuses on those events considered most important or most catastrophic. % Effects of duplication/redundancy of safety systems can be readily assessed. -It uses notations that are readily understood by engineers (logic symbols borrowed from digital electronics and a fault hierarchy). +It uses notations that are readily understood by engineers +(logic symbols borrowed from digital electronics and a fault hierarchy). However, it cannot guarantee to model all base component failures or be used to determine system level errors other than those modelled. % @@ -123,7 +126,7 @@ support for environmental and operational states. \paragraph{Fault Mode Effects Analysis (FMEA)} is used principally to determine system reliability. -It is bottom up and starts with component failure modes, which +It is bottom-up and starts with component failure modes, which lead to top level failure/events. Each top level failure is assessed by its cost to repair (or perceived criticality) and its estimated frequency. %, using a %failure mode ratio. @@ -140,7 +143,7 @@ self-checking safety elements or other in-built safety features or analyse how particular components may fail. -\paragraph{Failure Mode Criticality Analysis (FMECA)} is a refinement of FMEA, using +\paragraph{Failure Mode Effects Criticality Analysis (FMECA)} is a refinement of FMEA, using three extra variables: the probability of a component failure mode occurring, the probability that this will cause a given top level failure, and the perceived critically. It gives better estimations of product reliability/safety and the @@ -152,7 +155,8 @@ FMEA and FMECA and models self-checking safety elements. It assigns two attributes to component failure modes: detectable/undetectable and safe/dangerous. Statistical measures about the system can be made and used to classify a safety integrity level. It allows designs with in-built safety features to be assessed. -Otherwise, it has similar deficiencies to FMEA but has limited support +Otherwise, it has similar deficiencies to FMEA. +However, it has limited support for environmental and operational states in sub-systems or components, via self checking statistical mitigation. FMEDA is the methodology associated with the safety integrity standards IOC5108 and EN61508~\cite{en61508}. @@ -162,25 +166,27 @@ the safety integrity standards IOC5108 and EN61508~\cite{en61508}. \paragraph{Top Down approach: FTA} The top down technique FTA, introduces the possibility of missing base component level failure modes~\cite{faa}[Ch.9]. Since one FTA tree is drawn for each top level event, this leads to repeated work, with limited ability for cross checking/model validation. +Also, the analysis process can miss top level events that bottom-up techniques +can reveal. %\subsection{Bottom-up approach: } \paragraph{State Explosion problem for FMEA, FMECA, FMEDA.} -The bottom -up techniques all suffer from % a problem of +The bottom-up techniques all suffer from % a problem of state explosion. To perform the analysis rigorously, we would need to consider the effect of a component failure against all other components. Adding environmental and operational states further increases this effect. -Let N be the number of components in our system, and K be the average number of component failure modes +Let $N$ be the number of components in our system, and $K$ be the average number of component failure modes (ways in which a component can fail). The approximate total number of base component failure modes is $N \times K$. To examine the effect that one failure mode has on all the other components\footnote{A %base component failure will typically affect the sub-system -it is part of, and create a failure effect at the SYSTEM level.} +it is part of, and create a failure effect at the system level.} will be $(N-1) \times N \times K$. %, in effect a very large set cross product. If $E$ is the number of environmental conditions to consider -in a system, and $A$ the number of applied/operational states (or modes of the SYSTEM), +in a system, and $A$ the number of applied/operational states (or modes of the system), the bottom-up analyst is presented with two additional %cross product factors, @@ -189,7 +195,7 @@ If we put some typical very small embedded system numbers\footnote{these figures be typical of a very simple temperature controller, with a micro-controller sensor and heater circuit.} into this, say $N=100$, $K=2.5$, $A=2$, and $E=10$ we have $99 \times 100 \times 2.5 \times 10 \times 2 = 495000 $. -To look in detail at a half of a million test cases is obviously impractical. +To look in detail at half a million fault~scenarios is obviously impractical. % Requirements for an improved methodology The deficiencies identified in the % current methodologies are used to establish criteria for an improved methodology. @@ -210,7 +216,7 @@ To look in detail at a half of a million test cases is obviously impractical. % % The reasoning distance is a value representing the number of failure modes % to consider to rigorously determine the causation chain -% from the base component failure to the SYSTEM level event. +% from the base component failure to the system level event. % % The reasoning distance serves to show that when the causes of a top level % event are completely determined, a large amount of work not @@ -221,22 +227,23 @@ To look in detail at a half of a million test cases is obviously impractical. %\paragraph{Multiple Events from one base component failure mode} %A base component failure may potentially cause more than one -%SYSTEM level failure mode. +%system level failure mode. %It would be possible to identify one top level event associated with %a {\bcfm} and not investigate other possibilities. %\section{Requirements for a new static failure mode Analysis methodology} -\section{Desireable Criteria for a failure mode methodology.} +\section{Desireable Criteria.} From the deficiencies outlined above, ideally we can form a set of desirable criteria for a better methodology. { \small +\label{criteria} \begin{enumerate} %\begin{itemize} \label{fmmdreq} \item Address the state explosion problem. % 1 \item Ensure that all component failure modes be considered in the model. % 2 \item Be easy to integrate mechanical, electronic and software models \cite{sccs}[pp.287]. %3 -\item Be re-usable, in that commonly used modules can be re-used in other designs/projects. %4 +\item Be modular, in that commonly used {\fgs} can be re-used in other designs/projects. %4 \item It should have a formal basis, that is to say, be able to produce mathematical traceability %5 for its results, such as error causation trees.%, reliability and safety statistics. %\item It should be easy to use, ideally using a @@ -310,7 +317,7 @@ for its results, such as error causation trees.%, reliability and safety statis % Derived~Components can be used to create higher level {\fgs}. % Repeating this process will lead to identify-able higher level % groups, often referred to as sub-systems. We can call the entire collection/hierarchy -% of sub-systems the SYSTEM. +% of sub-systems the system. @@ -321,7 +328,7 @@ for its results, such as error causation trees.%, reliability and safety statis % starting with individual component failure modes. To ensure all component failure modes are represented the new methodology must be bottom-up. % -This seems essential to satisfy criteria 2. +This seems essential to satisfy criterion 2. The proposed methodology is therefore a bottom-up process starting with base~components. % @@ -330,7 +337,10 @@ mechanical, electronic or software components, criteria 3 is satisfied. % In order to address the state explosion problem, the process must be modular and hierarchical -dealing with small groups of components at a time; this should address criteria 1. +dealing with small groups of components at a time; this should address criterion 1. + + + % In the proposed methodology components are collected into functional groups and each component failure (and optionally combinations) are considered in the @@ -345,77 +355,81 @@ there will be a corresponding resultant failure, or `symptom', from the perspect It is conjectured that many symptoms will be common. That is to say that component failures, will often cause the same symptoms of failure from the perspective of a {\fg}. + + + % A common symptom collection stage is now applied. Here common symptoms are collected from the results of the test~cases. Because optional combinations of failures are possible, -multiple failures can be modelled, satisfying criteria 6. +multiple failures can be modelled, satisfying criterion 6. % -With a collection of the {\fg} failure symptoms, we can now create a {\dc}. +With a collection of the {\fg} failure symptoms, we can create a {\dc}. The failure modes of this new {\dc} are the symptoms of the {\fg} it was derived from. -This satisfies criteria 3, as we can now treat {\dcs} as pre-analysed +This satisfies criterion 3, as we can now treat {\dcs} as pre-analysed modules available for re-use. By using {\dcs} in higher level functional groups, a hierarchy can be built representing -the failure mode behaviour of a SYSTEM. Because the hierarchy maintains information +the failure mode behaviour of a system. Because the hierarchy maintains information linking the symptoms to test~cases to component failure modes, we have traceable reasoning connections from base component failures to top level failures. -The traceability should satisfy criteria 5. +The traceability should satisfy criterion 5. - -\paragraph{Environmental Conditions, Operational States.} +% ONTOLOGY - NO ROOM IN 6 PAGES OF PAPER +% \paragraph{Environmental Conditions, Operational States.} +% +% Any real world sub-system will exist in a variable environment +% and may have several modes of operation. +% In order to find all possible failures, a sub-system +% must be analysed for each operational state +% and environmental condition that could affect it. +% % +% A question is raised here: which objects should we +% associate the environmental and the operational states with ? +% There are three objects in our model to which these considerations could be applied. +% We could apply these conditions +% to {\fgs}, components, or {\dcs}. +% +% \paragraph {Environmental Conditions.} +% +% Environmental conditions are external to the +% {\fg} and are often things over which the system has no direct control +% ( e.g. ambient temperature, pressure or electrical interference levels). +% % +% Environmental conditions may affect different components in a {\fg} +% in different ways. +% +% For instance, a system may be specified for +% $0\oc$ to $85\oc$ operation, but some components +% may show failure behaviour between $60\oc$ and $85\oc$ +% \footnote{Opto-isolators typically show marked performance decrease after +% $60\oc$ \cite{tlp181}, whereas another common component, say a resistor, will be unaffected.}. +% Other components may operate comfortably within that whole temperature range specified. +% Environmental conditions will have an effect on the {\fg} and the {\dc}, +% but they will have specific effects on individual components. +% +% It seems obvious that +% environmental conditions should apply to components. +% %A component will hold a set of environmental states that +% %affect it. +% +% \paragraph {Operational States} +% +% Sub-systems may have specific operational states. +% These could be a general health level, such as +% normal operation, graceful degradation or lockout. +% Alternatively they could be self~checking sub-systems that are either in a normal, alarm/lockout or self~check state. +% +% Operational states are conditions that apply to some functional groups, not individual components. -Any real world sub-system will exist in a variable environment -and may have several modes of operation. -In order to find all possible failures, a sub-system -must be analysed for each operational state -and environmental condition that could affect it. -% -A question is raised here: which objects should we -associate the environmental and the operational states with ? -There are three objects in our model to which these considerations could be applied. -We could apply these conditions -to {\fgs}, components, or {\dcs}. +%\section{The Non-Inverting Operational Amplifier} +\section{Non-Inverting Amplifier} -\paragraph {Environmental Conditions.} - -Environmental conditions are external to the -{\fg} and are often things over which the system has no direct control -( e.g. ambient temperature, pressure or electrical interference levels). -% -Environmental conditions may affect different components in a {\fg} -in different ways. - -For instance, a system may be specified for -$0\oc$ to $85\oc$ operation, but some components -may show failure behaviour between $60\oc$ and $85\oc$ -\footnote{Opto-isolators typically show marked performance decrease after -$60\oc$ \cite{tlp181}, whereas another common component, say a resistor, will be unaffected.}. -Other components may operate comfortably within that whole temperature range specified. -Environmental conditions will have an effect on the {\fg} and the {\dc}, -but they will have specific effects on individual components. - -It seems obvious that -environmental conditions should apply to components. -%A component will hold a set of environmental states that -%affect it. - -\paragraph {Operational States} - -Sub-systems may have specific operational states. -These could be a general health level, such as -normal operation, graceful degradation or lockout. -Alternatively they could be self~checking sub-systems that are either in a normal, alarm/lockout or self~check state. - -Operational states are conditions that apply to some functional groups, not individual components. - -\section{Worked Example: Non-Inverting Operational Amplifier} - -A standard non inverting op amp~\cite{aoe}[pp.234] is shown in figure \ref{fig:noninvamp}. +As an example, we consider a standard non-inverting op amp~\cite{aoe}[p.234], shown in figure \ref{fig:noninvamp}. -\begin{figure}[h] +\begin{figure}[h+] \centering - \includegraphics[width=200pt,keepaspectratio=true]{../../noninvopamp/noninv.png} + \includegraphics[width=150pt,keepaspectratio=true]{../../noninvopamp/noninv.png} % noninv.jpg: 341x186 pixel, 72dpi, 12.03x6.56 cm, bb=0 0 341 186 \caption{Standard non inverting amplifier configuration} \label{fig:noninvamp} @@ -451,13 +465,13 @@ We can now represent a resistor in terms of its failure modes as a directed acyc \tikzstyle{failure}=[fmmde, fill=red!50]; \tikzstyle{symptom}=[fmmde, fill=blue!50]; \tikzstyle{annot} = [text width=4em, text centered] - \node[component] (R) at (0,-3) {$R$}; - \node[failure] (RSHORT) at (\layersep,-2) {$R_{SHORT}$}; - \node[failure] (ROPEN) at (\layersep,-4) {$R_{OPEN}$}; + \node[component] (R) at (0,-0.8) {$R$}; + \node[failure] (RSHORT) at (\layersep,-0) {$R_{SHORT}$}; + \node[failure] (ROPEN) at (\layersep,-1.6) {$R_{OPEN}$}; \path (R) edge (RSHORT); \path (R) edge (ROPEN); \end{tikzpicture} - \caption{DAG representing a reistor and its failure modes} + \caption{DAG representing a resistor and its failure modes} \label{fig:rdag} \end{figure} } @@ -467,7 +481,7 @@ Thus $R1$ has failure modes $\{R1\_OPEN, R1\_SHORT\}$ and $R2$ has failure modes %\clearpage -\paragraph{Failure Mode Analysis of the Potential Divider} +%\paragraph{Failure Mode Analysis of the Potential Divider} \ifthenelse {\boolean{pld}} { @@ -485,58 +499,58 @@ in the potential divider, shown in figure \ref{fig:fg1}. { } -\ifthenelse {\boolean{dag}} -{ -Modelling this as a functional group, we can draw a directed graph -of failure modes, starting from the components R1 and R2, -in the potential divider, as shown in figure \ref{fig:fg1dag}. -\begin{figure} - \centering - \begin{tikzpicture}[shorten >=1pt,->,draw=black!50, node distance=\layersep] - \tikzstyle{every pin edge}=[<-,shorten <=1pt] - \tikzstyle{fmmde}=[circle,fill=black!25,minimum size=30pt,inner sep=0pt] - \tikzstyle{component}=[fmmde, fill=green!50]; - \tikzstyle{failure}=[fmmde, fill=red!50]; - \tikzstyle{symptom}=[fmmde, fill=blue!50]; - \tikzstyle{annot} = [text width=4em, text centered] - - \node[component] (R1) at (0,-4) {$R_1$}; - \node[component] (R2) at (0,-6) {$R_2$}; +% \ifthenelse {\boolean{dag}} +% { +% Modelling this as a functional group, we can draw a directed graph +% of failure modes, starting from the components R1 and R2, +% in the potential divider, as shown in figure \ref{fig:fg1dag}. +% \begin{figure} +% \centering +% \begin{tikzpicture}[shorten >=1pt,->,draw=black!50, node distance=\layersep] +% \tikzstyle{every pin edge}=[<-,shorten <=1pt] +% \tikzstyle{fmmde}=[circle,fill=black!25,minimum size=30pt,inner sep=0pt] +% \tikzstyle{component}=[fmmde, fill=green!50]; +% \tikzstyle{failure}=[fmmde, fill=red!50]; +% \tikzstyle{symptom}=[fmmde, fill=blue!50]; +% \tikzstyle{annot} = [text width=4em, text centered] +% +% \node[component] (R1) at (0,-4) {$R_1$}; +% \node[component] (R2) at (0,-6) {$R_2$}; +% +% \node[failure] (R1SHORT) at (\layersep,-2) {$R1_{SHORT}$}; +% \node[failure] (R1OPEN) at (\layersep,-4) {$R1_{OPEN}$}; +% +% \node[failure] (R2SHORT) at (\layersep,-6) {$R2_{SHORT}$}; +% \node[failure] (R2OPEN) at (\layersep,-8) {$R2_{OPEN}$}; +% +% \path (R1) edge (R1SHORT); +% \path (R1) edge (R1OPEN); +% +% \path (R2) edge (R2SHORT); +% \path (R2) edge (R2OPEN); +% +% % Potential divider failure modes +% % +% %\node[symptom] (PDHIGH) at (\layersep*2,-4) {$PD_{HIGH}$}; +% %\node[symptom] (PDLOW) at (\layersep*2,-6) {$PD_{LOW}$}; +% +% %\path (R1OPEN) edge (PDHIGH); +% %\path (R2SHORT) edge (PDHIGH); +% +% %\path (R2OPEN) edge (PDLOW); +% %\path (R1SHORT) edge (PDLOW); +% +% \end{tikzpicture} +% +% \caption{DAG representing the functional group `Potential Divider'} +% \label{fig:fg1dag} +% \end{figure} +% } +% { +% } - \node[failure] (R1SHORT) at (\layersep,-2) {$R1_{SHORT}$}; - \node[failure] (R1OPEN) at (\layersep,-4) {$R1_{OPEN}$}; - - \node[failure] (R2SHORT) at (\layersep,-6) {$R2_{SHORT}$}; - \node[failure] (R2OPEN) at (\layersep,-8) {$R2_{OPEN}$}; - - \path (R1) edge (R1SHORT); - \path (R1) edge (R1OPEN); - - \path (R2) edge (R2SHORT); - \path (R2) edge (R2OPEN); - - % Potential divider failure modes - % - %\node[symptom] (PDHIGH) at (\layersep*2,-4) {$PD_{HIGH}$}; - %\node[symptom] (PDLOW) at (\layersep*2,-6) {$PD_{LOW}$}; - - %\path (R1OPEN) edge (PDHIGH); - %\path (R2SHORT) edge (PDHIGH); - - %\path (R2OPEN) edge (PDLOW); - %\path (R1SHORT) edge (PDLOW); - - \end{tikzpicture} - - \caption{DAG representing the functional group `Potential Divider'} - \label{fig:fg1dag} - \end{figure} -} -{ -} - -We shall now look at each of these base component failure modes, -and determine how they will affect the operation of the potential divider. +We look at each of these base component failure modes, +and determine how they affect the operation of the potential divider. %Each failure mode scenario we look at will be given a test case number, %which is represented on the diagram, with an asterisk marking %which failure modes is modelling (see figure \ref{fig:fg1a}). @@ -577,7 +591,7 @@ failures modes lead to some common `symptoms'. By drawing connecting lines in a graph, from the failure modes to the symptoms we can show the relationships between the component failure modes and resultant symptoms. %The {\fg} can now be considered a derived component. -This is represented in the DAG in figure \ref{fig:fg1adag}. +This is represented in the DAG in figure \ref{fig:fg2adag}. \begin{figure}[h+] \centering @@ -695,9 +709,9 @@ We can represent this as a DAG (see figure \ref{fig:dc1dag}). \tikzstyle{failure}=[fmmde, fill=red!50]; \tikzstyle{symptom}=[fmmde, fill=blue!50]; \tikzstyle{annot} = [text width=4em, text centered] - \node[component] (PD) at (0,-3) {$PD$}; - \node[symptom] (PDHIGH) at (\layersep,-2) {$PD_{HIGH}$}; - \node[symptom] (PDLOW) at (\layersep,-4) {$PD_{LOW}$}; + \node[component] (PD) at (0,-0.8) {$PD$}; + \node[symptom] (PDHIGH) at (\layersep,-0) {$PD_{HIGH}$}; + \node[symptom] (PDLOW) at (\layersep,-1.6) {$PD_{LOW}$}; \path (PD) edge (PDHIGH); \path (PD) edge (PDLOW); \end{tikzpicture} @@ -718,13 +732,12 @@ as a building block for other {\fgs} in the same way as we used the base compone %\clearpage -\paragraph{Failure Mode Analysis of the OP-AMP} +%\paragraph{Failure Mode Analysis of the OP-AMP} Let use now consider the op-amp. According to FMD-91~\cite{fmd91}[3-116] an op amp may have the following failure modes: latchup(12.5\%), latchdown(6\%), nooperation(31.3\%), lowslewrate(50\%). \nocite{mil1991} - \ifthenelse {\boolean{pld}} { We can represent these failure modes on a diagram (see figure~\ref{fig:op1}). @@ -738,7 +751,6 @@ We can represent these failure modes on a diagram (see figure~\ref{fig:op1}). } { } - \ifthenelse {\boolean{dag}} { We can represent these failure modes on a DAG (see figure~\ref{fig:op1dag}). @@ -752,12 +764,12 @@ We can represent these failure modes on a DAG (see figure~\ref{fig:op1dag}). \tikzstyle{symptom}=[fmmde, fill=blue!50]; \tikzstyle{annot} = [text width=4em, text centered] - \node[component] (OPAMP) at (0,-4) {$OPAMP$}; + \node[component] (OPAMP) at (0,-2.3) {$OPAMP$}; \node[failure] (OPAMPLU) at (\layersep,-0) {latchup}; - \node[failure] (OPAMPLD) at (\layersep,-2) {latchdown}; - \node[failure] (OPAMPNP) at (\layersep,-4) {noop}; - \node[failure] (OPAMPLS) at (\layersep,-6) {lowslew}; + \node[failure] (OPAMPLD) at (\layersep,-1.5) {latchdown}; + \node[failure] (OPAMPNP) at (\layersep,-2.9) {noop}; + \node[failure] (OPAMPLS) at (\layersep,-4.1) {lowslew}; \path (OPAMP) edge (OPAMPLU); \path (OPAMP) edge (OPAMPLD); @@ -773,10 +785,8 @@ We can represent these failure modes on a DAG (see figure~\ref{fig:op1dag}). } { } - %\clearpage - -\paragraph{Modelling the OP amp with the potential divider.} +%\paragraph{Modelling the OP amp with the potential divider.} We can now consider merging the OP amp and the potential divider, to form a {\fg} to represent the non inverting amplifier. We have the failure modes of the {\dc} for the potential divider, so we do not need to go back and consider the individual resistor failure modes that defined its behaviour. @@ -940,7 +950,7 @@ We can now derive a `component' to represent this amplifier configuration (see f %failure mode contours). %\clearpage %\clearpage -\paragraph{Failure Modes from non inverting amplifier as a Directed Acyclic Graph (DAG)} +%\paragraph{Failure Modes from non inverting amplifier as a Directed Acyclic Graph (DAG)} \ifthenelse {\boolean{pld}} { We can now represent the FMMD analysis as a directed graph, see figure \ref{fig:noninvdag1}. @@ -977,9 +987,9 @@ to assist in building models for FTA, FMEA, FMECA and FMEDA failure mode analysi % This is the same as writing \foreach \name / \y in {1/1,2/2,3/3,4/4} % \node[component, pin=left:Input \#\y] (I-\name) at (0,-\y) {}; - \node[component] (OPAMP) at (0,-4) {$OPAMP$}; - \node[component] (R1) at (0,-9) {$R_1$}; - \node[component] (R2) at (0,-13) {$R_2$}; + \node[component] (OPAMP) at (0,-2.8) {$OPAMP$}; + \node[component] (R1) at (0,-7) {$R_1$}; + \node[component] (R2) at (0,-10) {$R_2$}; %\node[component] (C-3) at (0,-5) {$C^0_3$}; %\node[component] (K-4) at (0,-8) {$K^0_4$}; @@ -992,15 +1002,15 @@ to assist in building models for FTA, FMEA, FMECA and FMEDA failure mode analysi % \path[yshift=0.5cm] \node[failure] (OPAMPLU) at (\layersep,-0) {latchup}; - \node[failure] (OPAMPLD) at (\layersep,-2) {latchdown}; - \node[failure] (OPAMPNP) at (\layersep,-4) {noop}; - \node[failure] (OPAMPLS) at (\layersep,-6) {lowslew}; + \node[failure] (OPAMPLD) at (\layersep,-1.6) {latchdown}; + \node[failure] (OPAMPNP) at (\layersep,-3.2) {noop}; + \node[failure] (OPAMPLS) at (\layersep,-4.4) {lowslew}; - \node[failure] (R1SHORT) at (\layersep,-9) {$R1_{SHORT}$}; - \node[failure] (R1OPEN) at (\layersep,-11) {$R1_{OPEN}$}; + \node[failure] (R1SHORT) at (\layersep,-6.0) {$R1_{SHORT}$}; + \node[failure] (R1OPEN) at (\layersep,-7.6) {$R1_{OPEN}$}; - \node[failure] (R2SHORT) at (\layersep,-13) {$R2_{SHORT}$}; - \node[failure] (R2OPEN) at (\layersep,-15) {$R2_{OPEN}$}; + \node[failure] (R2SHORT) at (\layersep,-9.2) {$R2_{SHORT}$}; + \node[failure] (R2OPEN) at (\layersep,-10.7) {$R2_{OPEN}$}; @@ -1024,8 +1034,8 @@ to assist in building models for FTA, FMEA, FMECA and FMEDA failure mode analysi % Potential divider failure modes % - \node[symptom] (PDHIGH) at (\layersep*2,-11) {$PD_{HIGH}$}; - \node[symptom] (PDLOW) at (\layersep*2,-13) {$PD_{LOW}$}; + \node[symptom] (PDHIGH) at (\layersep*2,-7) {$PD_{HIGH}$}; + \node[symptom] (PDLOW) at (\layersep*2,-9) {$PD_{LOW}$}; @@ -1038,9 +1048,9 @@ to assist in building models for FTA, FMEA, FMECA and FMEDA failure mode analysi - \node[symptom] (AMPHIGH) at (\layersep*3.4,-7) {$AMP_{HIGH}$}; - \node[symptom] (AMPLOW) at (\layersep*3.4,-9) {$AMP_{LOW}$}; - \node[symptom] (AMPLP) at (\layersep*3.4,-11) {$LOWPASS$}; + \node[symptom] (AMPHIGH) at (\layersep*3.4,-3) {$AMP_{HIGH}$}; + \node[symptom] (AMPLOW) at (\layersep*3.4,-5) {$AMP_{LOW}$}; + \node[symptom] (AMPLP) at (\layersep*3.4,-7) {$LOWPASS$}; \path (PDLOW) edge (AMPHIGH); \path (OPAMPLU) edge (AMPHIGH); @@ -1084,28 +1094,29 @@ to assist in building models for FTA, FMEA, FMECA and FMEDA failure mode analysi \label{fig:noninvdag1} \end{figure} -\paragraph{Worked example. Effect on State explosion.} +%\paragraph{Worked example. Effect on State explosion.} The potential divider {\dc} reduced the number of failures to consider from four to two. The op-amp and potential divider modelled together, reduced the number of base component failures from eight to three failure symptoms. % In general, because symptoms are collected, we can state -the the number of failure symptoms for a {\fg} will be less than or equal to the number -of component failures. In practise the number of symptoms is usually around half the -number of component failure modes, for each stage of FMMD analysis. - +the number of failure symptoms for a {\fg} will be less than or equal to the number +of component failures. +% In practise the number of symptoms is usually around half the +%number of component failure modes, for each stage of FMMD analysis. This methodology has also been applied elsewhere to the inverting amplifier configuration. -Clearly one can then use use these derived components in more complex circuits where the advantages of FMMD become more obvious. +One can then use use {\dcs} in more complex circuits where the advantages of FMMD become more obvious, +(such as $8^{th}$ order filters using four bi-quad op-amp stages). -\subsection{Evaluation against Desirable Criteria} +\subsection{Evaluation of FMMD} %By applying the methodology in section \ref{fmmdproc}, the wishlist can %now be evaluated for the proposed FMMD methodology. -We can now evaluate the FMMD method using the criteria in section \ref{fmmdreq}. - +We evaluate the FMMD method using the criteria in section \ref{fmmdreq}. +Table \ref{tbl:comparison} compares the current methodologies and FMMD using these criteria. { \small \begin{itemize} \item{State Explosion is reduced,} @@ -1134,16 +1145,16 @@ or even in other projects where the same {\dc} is used. \item{ It should have a formal basis, data should be available to produce mathematical proofs for its results} -Because the failure mode model of a SYSTEM is a hierarchy of {\fg}s and {\dcs} -SYSTEM level failure modes are traceable back down the fault tree to +Because the failure mode model of a system is a hierarchy of {\fg}s and {\dcs} +system level failure modes are traceable back down the fault tree to component level failure modes. % -This allows causation trees \cite{sccs} or, minimal cut sets~\cite{nasafta}[Ch.1pp3] +This allows causation trees \cite{sccs} or, minimal cut sets~\cite{nasafta}[Ch.1p3] to be determined by traversing the DAG from top level events down to their causes. % \item{ It should be capable of producing reliability and danger evaluation statistics.} -% The minimal cuts sets for the SYSTEM level failures can have computed MTTF +% The minimal cuts sets for the system level failures can have computed MTTF % and danger evaluation statistics sourced from the component failure mode statistics~\cite{fmd91,mil1991}. % \item{ It should be easy to use, ideally @@ -1163,7 +1174,8 @@ to be determined by traversing the DAG from top level events down to their cause \item{ Multiple failure modes (conjunction) may be modelled from the base component level up.} By breaking the problem of failure mode analysis into small stages and building a hierarchy, the problems associated with the cross products of -all failure modes within a system are reduced by an exponential order. +all failure modes within a system are reduced. +% by an exponential order. This is because the multiple failure modes are considered within {\fgs} which have fewer failure modes to consider at each FMMD stage. @@ -1172,27 +1184,6 @@ introducing test~cases where the conjunction of failure modes is considered. \end{itemize} } -%\clearpage -\section{Conclusion} - -This new approach is called -Failure Mode Modular De-Composition (FMMD) and is designed -to be a %superset -a more rigorous and `data~complete' model than -the current four approaches, that is to say, -from an FMMD model, we should be able to -derive outline models that the other four methodologies would have been -able to create. As this approach is modular, many of the results of -analysed components may be re-used in other projects, so -test efficiency is improved. -FMMD is based on generic failure modes, so it is not constrained to a -particular field. It can be applied to mechanical, electrical or software domains. -It can therefore be used to analyse systems comprised of electrical, -mechanical and software elements in one integrated model. -Furthermore the reasoning path is traceable. By being able to trace a -top level event down through derived components, to base component -failure modes, with each step annotated as test cases, the model is easier to maintain. - { %\tiny \begin{table}[ht] \caption{Features of static Failure Mode analysis methodologies} % title of Table @@ -1220,9 +1211,29 @@ failure modes, with each step annotated as test cases, the model is easier to ma \hline \hline \end{tabular} -\label{pdfmea} +\label{tbl:comparison} \end{table} } +%\clearpage +\section{Conclusion} + +%This new approach is called +Failure Mode Modular De-Composition (FMMD) is designed +to be a more rigorous and `data~complete' model than +the current four approaches, that is to say, +from an FMMD model, we should be able to +derive outline models that the other four methodologies would have been +able to create. As this approach is modular, many of the results of +analysed components may be re-used in other projects, so +test efficiency is improved. +FMMD is based on generic failure modes, so it is not constrained to a +particular field. It can be applied to mechanical, electrical or software domains. +It can therefore be used to analyse systems comprised of electrical, +mechanical and software elements in one integrated model. +Furthermore the reasoning path is traceable. By being able to trace a +top level event down through derived components, to base component +failure modes, with each step annotated as test cases, the model is easier to maintain. + %\today % { \small @@ -1230,6 +1241,6 @@ failure modes, with each step annotated as test cases, the model is easier to ma \bibliography{vmgbibliography,mybib} } -\today +%\today \end{document} diff --git a/related_papers_books/style_sheets/IEEE/bare_adv.tex b/related_papers_books/style_sheets/IEEE/bare_adv.tex new file mode 100755 index 0000000..de97ffa --- /dev/null +++ b/related_papers_books/style_sheets/IEEE/bare_adv.tex @@ -0,0 +1,1100 @@ + +%% bare_adv.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the advanced use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer +%% Society journal paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + + +% IEEEtran V1.7 and later provides for these CLASSINPUT macros to allow the +% user to reprogram some IEEEtran.cls defaults if needed. These settings +% override the internal defaults of IEEEtran.cls regardless of which class +% options are used. Do not use these unless you have good reason to do so as +% they can result in nonIEEE compliant documents. User beware. ;) +% +%\newcommand{\CLASSINPUTbaselinestretch}{1.0} % baselinestretch +%\newcommand{\CLASSINPUTinnersidemargin}{1in} % inner side margin +%\newcommand{\CLASSINPUToutersidemargin}{1in} % outer side margin +%\newcommand{\CLASSINPUTtoptextmargin}{1in} % top text margin +%\newcommand{\CLASSINPUTbottomtextmargin}{1in}% bottom text margin + + + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[12pt,journal,compsoc]{IEEEtran} +% The Computer Society requires 12pt. +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[10pt,journal,compsoc]{../sty/IEEEtran} + + +% For Computer Society journals, IEEEtran defaults to the use of +% Palatino/Palladio as is done in IEEE Computer Society journals. +% To go back to Times Roman, you can use this code: +%\renewcommand{\rmdefault}{ptm}\selectfont + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +\ifCLASSOPTIONcompsoc + % IEEE Computer Society needs nocompress option + % requires cite.sty v4.0 or later (November 2003) + % \usepackage[nocompress]{cite} +\else + % normal IEEE + % \usepackage{cite} +\fi +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. +% +% Note that some packages require special options to format as the Computer +% Society requires. In particular, Computer Society papers do not use +% compressed citation ranges as is done in typical IEEE papers +% (e.g., [1]-[4]). Instead, they list every citation separately in order +% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite +% package with the nocompress option which is supported by cite.sty v4.0 +% and later. Note also the use of a CLASSOPTION conditional provided by +% IEEEtran.cls V1.7 and later. + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + +%\usepackage{ps4pdf} +% dvi->ps workflow is required to use such packages as psfrag.sty and +% pstricks.sty. However, Rolf Niepraschk's ps4pdf.sty provides a way to +% apply psfrag/pstricks effects to .eps figures and then get the resultant +% figures in .pdf form. Thus, providing an easier way for migrating from +% .eps to .pdf figures. After ps4pdf.sty loads, if: +% 1. producing .dvi output: the output file will consist ONLY of the +% figures (or other constructs encased within \PSforPDF commands) +% 2. producing .pdf output: pdflatex will look in the filename-pics.pdf +% file, where filename is the basename of the tex document, for the +% graphics (or other constructs encased within \PSforPDF commands). +% NOTE: If you ever change your figures, you must remember to remake +% the filename-pics.pdf file. +% +% This way you can do a: +% +% latex filename +% dvips -Ppdf -o filename-pics.ps filename.dvi +% ps2pdf filename-pics.ps filename-pics.pdf +% +% to produce a filename-pics.pdf graphics container that contains +% .pdf versions of the graphics with psfrag, pstricks, etc. features. +% Note that you will not typically be able to view the figures in +% filename-pics.ps because of an offset. However, you will be able to +% view them in filename-pics.pdf. Also, note that when ps4pdf is in effect +% with .dvi output, you may get harmless over/under full box warnings - +% ignore them. +% Then, run pdflatex: +% +% pdflatex filename +% +% to use pdflatex to make PDF output, automatically using the figures in +% filename-pics.pdf. Alternatively, you could use dvips -i option to +% obtain separate .pdf files for each figure: +% +% dvips -Ppdf -i -E -o fig filename +% +% then convert each figure to pdf via a command such as epstopdf and then +% use pdflatex with these pdf figures and then to dispense with ps4pdf. +% +% Remember to rerun through latex/dvips/ps2pdf if you ever change your +% figures so that filename-pics.pdf gets updated. +% ps4pdf requires David Kastrup's preview-latex and a recent LaTeX system +% (circa 2001 or later). The ps4pdf package and documentation can be +% obtained at: http://www.ctan.org/tex-archive/macros/latex/contrib/ps4pdf/ +% The preview-latex package and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/preview/ +% +% provide a bogus \PSforPDF, even when not loading pd4pdf. This way we can +% stop loading ps4pdf.sty if we choose to make separate .pdf versions of +% each of our figures. +\providecommand{\PSforPDF}[1]{#1} +% Note that in order for ps4pdf to work, all commands related to psfrag, +% pstricks, etc. must be called within the PSforPDF command. This applies +% even when *loading* via \usepackage psfrag.sty, etc. + + +%\PSforPDF{\usepackage{psfrag}} +% psfrag.sty was written by Craig Barratt, Michael C. Grant, and +% David Carlisle. It allows you to substitute LaTeX commands for text in +% imported EPS graphic files. In this way, LaTeX symbols can be placed into +% graphics that have been generated by other applications. You must use +% latex->dvips->ps2pdf workflow (not direct pdf output from pdflatex) if +% you wish to use this capability because it works via some PostScript +% tricks. Alternatively, the graphics could be processed as separate files +% via psfrag and dvips, then converted to PDF for inclusion in the main file +% which uses pdflatex. ps4pdf.sty (above) provides a way of doing this all +% at once within the main file. +% Docs are in "The PSfrag System" by Michael C. Grant and David Carlisle. +% There is also some information about using psfrag in "Using Imported +% Graphics in LaTeX2e" by Keith Reckdahl which documents the graphicx +% package (see above). The psfrag package and documentation can be obtained +% at: http://www.ctan.org/tex-archive/macros/latex/contrib/psfrag/ +% +% Note that the current version of psfrag does not "turn itself off" when +% running under pdf output. This will result in a harmless warning +% about a non-PDF \special. However, to silence this, a bogus psfrag +% command can be provided instead of loading psfrag.sty when PDF output +% is being used. Thus, a more complex alternative conditional loading scheme +% can be employed instead of the straightforword way above: +% +%\ifCLASSINFOpdf +% if outputting PDF, do not use or load psfrag.sty as current versions +% output a non-PDF special that generates a harmless, but annoying warning. +% Instead, we provide a bogus \psfrag command that does nothing with +% its arguments. This is a tad tricky because \psfrag can have up to six +% arguments four of which are optional: \psfrag{}[][][][]{} +% Code based on that in psfrag.sty +%\makeatletter +%\def\psfrag{\@ifstar{\@BOGUSpsfraga}{\@BOGUSpsfraga}} +%\def\@BOGUSpsfraga{\begingroup +% \@makeother\"\@makeother\*\@makeother\!\@makeother\~% +% \@makeother\:\@makeother\\\@makeother\%\@makeother\#% +% \@makeother\ \@BOGUSpsfragb} +%\def\@BOGUSpsfragb#1{\endgroup +% \@ifnextchar [{\@BOGUSpsfragc}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragc[#1]{\@ifnextchar [{\@BOGUSpsfragd}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragd[#1]{\@ifnextchar [{\@BOGUSpsfrage}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfrage[#1]{\@ifnextchar [{\@BOGUSpsfragf}% +% {\@BOGUSpsfrag}} +%\def\@BOGUSpsfragf[#1]{\@BOGUSpsfrag} +%\def\@BOGUSpsfrag#1{\ignorespaces} +%\makeatother +%\else +% using dvi output, load psfrag, but funnel it through PSforPDF +% as required by ps4pdf.sty +%\PSforPDF{\usepackage{psfrag}} +%\fi + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +%\usepackage{acronym} +% acronym.sty was written by Tobias Oetiker. This package provides tools for +% managing documents with large numbers of acronyms. (You don't *have* to +% use this package - unless you have a lot of acronyms, you may feel that +% such package management of them is bit of an overkill.) +% Do note that the acronym environment (which lists acronyms) will have a +% problem when used under IEEEtran.cls because acronym.sty relies on the +% description list environment - which IEEEtran.cls has customized for +% producing IEEE style lists. A workaround is to declared the longest +% label width via the IEEEtran.cls \IEEEiedlistdecl global control: +% +% \renewcommand{\IEEEiedlistdecl}{\IEEEsetlabelwidth{SONET}} +% \begin{acronym} +% +% \end{acronym} +% \renewcommand{\IEEEiedlistdecl}{\relax}% remember to reset \IEEEiedlistdecl +% +% instead of using the acronym environment's optional argument. +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/acronym/ + + +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\ifCLASSOPTIONcompsoc +%\usepackage[tight,normalsize,sf,SF]{subfigure} +%\else +%\usepackage[tight,footnotesize]{subfigure} +%\fi +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. Computer Society papers +% use a larger font and \sffamily font for their captions, hence the +% additional options needed under compsoc mode. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false]{caption} +% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false]{caption} +% \usepackage[font=footnotesize]{subfig} +%\fi +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\ifCLASSOPTIONcompsoc +% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig} +%\else +% \usepackage[caption=false,font=footnotesize]{subfig} +%\fi +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + +% NOTE: PDF thumbnail features are not required in IEEE papers +% and their use requires extra complexity and work. +%\ifCLASSINFOpdf +% \usepackage[pdftex]{thumbpdf} +%\else +% \usepackage[dvips]{thumbpdf} +%\fi +% thumbpdf.sty and its companion Perl utility were written by Heiko Oberdiek. +% It allows the user a way to produce PDF documents that contain fancy +% thumbnail images of each of the pages (which tools like acrobat reader can +% utilize). This is possible even when using dvi->ps->pdf workflow if the +% correct thumbpdf driver options are used. thumbpdf.sty incorporates the +% file containing the PDF thumbnail information (filename.tpm is used with +% dvips, filename.tpt is used with pdftex, where filename is the base name of +% your tex document) into the final ps or pdf output document. An external +% utility, the thumbpdf *Perl script* is needed to make these .tpm or .tpt +% thumbnail files from a .ps or .pdf version of the document (which obviously +% does not yet contain pdf thumbnails). Thus, one does a: +% +% thumbpdf filename.pdf +% +% to make a filename.tpt, and: +% +% thumbpdf --mode dvips filename.ps +% +% to make a filename.tpm which will then be loaded into the document by +% thumbpdf.sty the NEXT time the document is compiled (by pdflatex or +% latex->dvips->ps2pdf). Users must be careful to regenerate the .tpt and/or +% .tpm files if the main document changes and then to recompile the +% document to incorporate the revised thumbnails to ensure that thumbnails +% match the actual pages. It is easy to forget to do this! +% +% Unix systems come with a Perl interpreter. However, MS Windows users +% will usually have to install a Perl interpreter so that the thumbpdf +% script can be run. The Ghostscript PS/PDF interpreter is also required. +% See the thumbpdf docs for details. The latest version and documentation +% can be obtained at. +% http://www.ctan.org/tex-archive/support/thumbpdf/ +% Be sure and use only version 3.8 (2005/07/06) or later of thumbpdf as +% earlier versions will not work properly with recent versions of pdfTeX +% (1.20a and later). + + +% NOTE: PDF hyperlink and bookmark features are not required in IEEE +% papers and their use requires extra complexity and work. +% *** IF USING HYPERREF BE SURE AND CHANGE THE EXAMPLE PDF *** +% *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!! *** +\newcommand\MYhyperrefoptions{bookmarks=true,bookmarksnumbered=true, +pdfpagemode={UseOutlines},plainpages=false,pdfpagelabels=true, +colorlinks=true,linkcolor={black},citecolor={black},pagecolor={black}, +urlcolor={black}, +pdftitle={Bare Demo of IEEEtran.cls for Computer Society Journals},%.dvi->.ps->.pdf workflow if the respective packages/scripts are +% loaded/invoked with the correct driver options (dvips, etc.). +% As most IEEE papers use URLs sparingly (mainly in the references), this +% may not be as big an issue as with other publications. +% +% That said, recently Vilar Camara Neto introduced his breakurl.sty +% package which permits hyperref to easily break URLs even in dvi +% mode. Note that breakurl, unlike most other packages, must be loaded +% AFTER hyperref. The latest version of breakurl and its documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/breakurl/ +% breakurl.sty is not for use under pdflatex pdf mode. Versions 1.10 +% (September 23, 2005) and later are recommened to avoid bugs in earlier +% releases. +% +% The advanced features offer by hyperref.sty are not required for IEEE +% submission, so users should weigh these features against the added +% complexity of use. Users who wish to use hyperref *must* ensure that +% their hyperref version is 6.72u or later *and* IEEEtran.cls is version +% 1.6b or later. +% The package options above demonstrate how to enable PDF bookmarks +% (a type of table of contents viewable in Acrobat Reader) as well as +% PDF document information (title, subject, author and keywords) that is +% viewable in Acrobat reader's Document_Properties menu. PDF document +% information is also used extensively to automate the cataloging of PDF +% documents. The above set of options ensures that hyperlinks will not be +% colored in the text and thus will not be visible in the printed page, +% but will be active on "mouse over". USING COLORS OR OTHER HIGHLIGHTING +% OF HYPERLINKS CAN RESULT IN DOCUMENT REJECTION BY THE IEEE, especially if +% these appear on the "printed" page. IF IN DOUBT, ASK THE RELEVANT +% SUBMISSION EDITOR. You may need to add the option hypertexnames=false if +% you used duplicate equation numbers, etc., but this should not be needed +% in normal IEEE work. +% The latest version of hyperref and its documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/hyperref/ + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Advanced Demo of IEEEtran.cls\\ for Computer Society Journals} +% +% +% author names and IEEE memberships +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% +% +%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted +% lists the Computer Society journals use for "first footnote" author +% affiliations. Use \IEEEcompsocthanksitem which works much like \item +% for each affiliation group. When not in compsoc mode, +% \IEEEcompsocitemizethanks becomes like \thanks and +% \IEEEcompsocthanksitem becomes a line break with idention. This +% facilitates dual compilation, although admittedly the differences in the +% desired content of \author between the different types of papers makes a +% one-size-fits-all approach a daunting prospect. For instance, compsoc +% journal papers have the author affiliations above the "Manuscript +% received ..." text while in non-compsoc journals this is reversed. Sigh. + +\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} + John~Doe,~\IEEEmembership{Fellow,~OSA,} + and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space +\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department +of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332.\protect\\ +% note need leading \protect in front of \\ to get a newline within \thanks as +% \\ is fragile and will error, could use \hfil\break instead. +E-mail: see http://www.michaelshell.org/contact.html +\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space +\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}} + +% note the % following the last \IEEEmembership and also \thanks - +% these prevent an unwanted space from occurring between the last author name +% and the end of the author line. i.e., if you had this: +% +% \author{....lastname \thanks{...} \thanks{...} } +% ^------------^------------^----Do not want these spaces! +% +% a space would be appended to the last name and could cause every name on that +% line to be shifted left slightly. This is one of those "LaTeX things". For +% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get +% "AB" then you have to do: "\textbf{A}\textbf{B}" +% \thanks is no different in this regard, so shield the last } of each \thanks +% that ends a line with a % and do not let a space in before the next \thanks. +% Spaces after \IEEEmembership other than the last one are OK (and needed) as +% you are supposed to have spaces between the names. For what it is worth, +% this is a minor point as most people would not even notice if the said evil +% space somehow managed to creep in. + + + +% The paper headers +\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Advanced Demo of IEEEtran.cls for Journals} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% +% *** Note that you probably will NOT want to include the author's *** +% *** name in the headers of peer review papers. *** +% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if +% you desire. + + + +% The publisher's ID mark at the bottom of the page is less important with +% Computer Society journal papers as those publications place the marks +% outside of the main text columns and, therefore, unlike regular IEEE +% journals, the available text space is not reduced by their presence. +% If you want to put a publisher's ID mark on the page you can do it like +% this: +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE} +% or like this to get the Computer Society new two part style. +%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}% +%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}} +% Remember, if you use this you must call \IEEEpubidadjcol in the second +% column for its text to clear the IEEEpubid mark (Computer Society jorunal +% papers don't need this extra clearance.) + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + +% for Computer Society papers, we must declare the abstract and index terms +% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran +% command as these need to go into the title area created by \maketitle. +\IEEEcompsoctitleabstractindextext{% +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the journal you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals frown on math +% in the abstract anyway. In particular, the Computer Society does +% not want either math or citations to appear in the abstract. + +% Note that keywords are not normally used for peerreview papers. +\begin{IEEEkeywords} +Computer Society, IEEEtran, journal, \LaTeX, paper, template. +\end{IEEEkeywords}} + + +% make the title area +\maketitle + + +% To allow for easy dual compilation without having to reenter the +% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will +% not be used in maketitle, but will appear (i.e., to be "transported") +% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode +% is not selected if conference mode is selected - because compsoc +% conference papers position the abstract like regular (non-compsoc) +% papers do! +\IEEEdisplaynotcompsoctitleabstractindextext +% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using +% compsoc under a non-conference mode. + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% Computer Society journal papers do something a tad strange with the very +% first section heading (almost always called "Introduction"). They place it +% ABOVE the main text! IEEEtran.cls currently does not do this for you. +% However, You can achieve this effect by making LaTeX jump through some +% hoops via something like: +% +%\ifCLASSOPTIONcompsoc +% \noindent\raisebox{2\baselineskip}[0pt][0pt]% +% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}% +% \global\everypar=\everypar}}% +% \vspace{-1\baselineskip}\vspace{-\parskip}\par +%\else +% \section{Introduction}\label{sec:introduction}\par +%\fi +% +% Admittedly, this is a hack and may well be fragile, but seems to do the +% trick for me. Note the need to keep any \label that may be used right +% after \section in the above as the hack puts \section within a raised box. + + + +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps (small caps for compsoc). +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for IEEE Computer Society journal papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. +% However, the Computer Society has been known to put floats at the bottom. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% However, Computer Society journals sometimes do use bottom floats - bear +% this in mind when choosing appropriate optional arguments for the +% figure/table environments. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Proof of the First Zonklar Equation} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\ifCLASSOPTIONcompsoc + % The Computer Society usually uses the plural form + \section*{Acknowledgments} +\else + % regular IEEE prefers the singular form + \section*{Acknowledgment} +\fi + + +The authors would like to thank... + + +% Can use something like this to put references on a page +% by themselves when using endfloat and the captionsoff option. +\ifCLASSOPTIONcaptionsoff + \newpage +\fi + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section +% +% If you have an EPS/PDF photo (graphicx package needed) extra braces are +% needed around the contents of the optional argument to biography to prevent +% the LaTeX parser from getting confused when it sees the complicated +% \includegraphics command within an optional argument. (You could create +% your own custom macro containing the \includegraphics command to make things +% simpler here.) +%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell} +% or if you just want to reserve a space for a photo: + +\begin{IEEEbiography}{Michael Shell} +Biography text here. +\end{IEEEbiography} + +% if you will not have a photo at all: +\begin{IEEEbiographynophoto}{John Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{Jane Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% You can push biographies down or up by placing +% a \vfill before or after them. The appropriate +% use of \vfill depends on what kind of text is +% on the last page and whether or not the columns +% are being equalized. + +%\vfill + +% Can be used to pull up biographies so that the bottom of the last one +% is flush with the other column. +%\enlargethispage{-5in} + + + +% that's all folks +\end{document} + + diff --git a/related_papers_books/style_sheets/IEEE/bare_conf.tex b/related_papers_books/style_sheets/IEEE/bare_conf.tex new file mode 100755 index 0000000..5b57279 --- /dev/null +++ b/related_papers_books/style_sheets/IEEE/bare_conf.tex @@ -0,0 +1,601 @@ + +%% bare_conf.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% See: +%% http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE conference paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[conference]{IEEEtran} +% Add the compsoc option for Computer Society conferences. +% +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[conference]{../sty/IEEEtran} + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +%\usepackage{cite} +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. + + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +% +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\usepackage[tight,footnotesize]{subfigure} +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + + +%\usepackage[caption=false]{caption} +%\usepackage[font=footnotesize]{subfig} +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\usepackage[caption=false,font=footnotesize]{subfig} +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Demo of IEEEtran.cls for Conferences} + + +% author names and affiliations +% use a multiple column layout for up to three different +% affiliations +\author{\IEEEauthorblockN{Michael Shell} +\IEEEauthorblockA{School of Electrical and\\Computer Engineering\\ +Georgia Institute of Technology\\ +Atlanta, Georgia 30332--0250\\ +Email: http://www.michaelshell.org/contact.html} +\and +\IEEEauthorblockN{Homer Simpson} +\IEEEauthorblockA{Twentieth Century Fox\\ +Springfield, USA\\ +Email: homer@thesimpsons.com} +\and +\IEEEauthorblockN{James Kirk\\ and Montgomery Scott} +\IEEEauthorblockA{Starfleet Academy\\ +San Francisco, California 96678-2391\\ +Telephone: (800) 555--1212\\ +Fax: (888) 555--1212}} + +% conference papers do not typically use \thanks and this command +% is locked out in conference mode. If really needed, such as for +% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts +% after \documentclass + +% for over three affiliations, or if they all won't fit within the width +% of the page, use this alternative format: +% +%\author{\IEEEauthorblockN{Michael Shell\IEEEauthorrefmark{1}, +%Homer Simpson\IEEEauthorrefmark{2}, +%James Kirk\IEEEauthorrefmark{3}, +%Montgomery Scott\IEEEauthorrefmark{3} and +%Eldon Tyrell\IEEEauthorrefmark{4}} +%\IEEEauthorblockA{\IEEEauthorrefmark{1}School of Electrical and Computer Engineering\\ +%Georgia Institute of Technology, +%Atlanta, Georgia 30332--0250\\ Email: see http://www.michaelshell.org/contact.html} +%\IEEEauthorblockA{\IEEEauthorrefmark{2}Twentieth Century Fox, Springfield, USA\\ +%Email: homer@thesimpsons.com} +%\IEEEauthorblockA{\IEEEauthorrefmark{3}Starfleet Academy, San Francisco, California 96678-2391\\ +%Telephone: (800) 555--1212, Fax: (888) 555--1212} +%\IEEEauthorblockA{\IEEEauthorrefmark{4}Tyrell Inc., 123 Replicant Street, Los Angeles, California 90210--4321}} + + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + + +% make the title area +\maketitle + + +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the conference you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals/conferences frown on +% math in the abstract anyway. + +% no keywords + + + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% no \IEEEPARstart +This demo file is intended to serve as a ``starter file'' +for IEEE conference papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals/conferences use top floats +% exclusively. Note that, LaTeX2e, unlike IEEE journals/conferences, places +% footnotes above bottom floats. This can be corrected via the \fnbelowfloat +% command of the stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + +% conference papers do not normally have an appendix + + +% use section* for acknowledgement +\section*{Acknowledgment} + + +The authors would like to thank... + + + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + + + + +% that's all folks +\end{document} + + diff --git a/related_papers_books/style_sheets/IEEE/bare_jrnl.tex b/related_papers_books/style_sheets/IEEE/bare_jrnl.tex new file mode 100755 index 0000000..09c2560 --- /dev/null +++ b/related_papers_books/style_sheets/IEEE/bare_jrnl.tex @@ -0,0 +1,745 @@ + +%% bare_jrnl.tex +%% V1.3 +%% 2007/01/11 +%% by Michael Shell +%% see http://www.michaelshell.org/ +%% for current contact information. +%% +%% This is a skeleton file demonstrating the use of IEEEtran.cls +%% (requires IEEEtran.cls version 1.7 or later) with an IEEE journal paper. +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and +%% http://www.ieee.org/ + + + +% *** Authors should verify (and, if needed, correct) their LaTeX system *** +% *** with the testflow diagnostic prior to trusting their LaTeX platform *** +% *** with production work. IEEE's font choices can trigger bugs that do *** +% *** not appear when using other class files. *** +% The testflow support page is at: +% http://www.michaelshell.org/tex/testflow/ + + +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex, +%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex +%%************************************************************************* + +% Note that the a4paper option is mainly intended so that authors in +% countries using A4 can easily print to A4 and see how their papers will +% look in print - the typesetting of the document will not typically be +% affected with changes in paper size (but the bottom and side margins will). +% Use the testflow package mentioned above to verify correct handling of +% both paper sizes by the user's LaTeX system. +% +% Also note that the "draftcls" or "draftclsnofoot", not "draft", option +% should be used if it is desired that the figures are to be displayed in +% draft mode. +% +\documentclass[journal]{IEEEtran} +% +% If IEEEtran.cls has not been installed into the LaTeX system files, +% manually specify the path to it like: +% \documentclass[journal]{../sty/IEEEtran} + + + + + +% Some very useful LaTeX packages include: +% (uncomment the ones you want to load) + + +% *** MISC UTILITY PACKAGES *** +% +%\usepackage{ifpdf} +% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional +% compilation based on whether the output is pdf or dvi. +% usage: +% \ifpdf +% % pdf code +% \else +% % dvi code +% \fi +% The latest version of ifpdf.sty can be obtained from: +% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/ +% Also, note that IEEEtran.cls V1.7 and later provides a builtin +% \ifCLASSINFOpdf conditional that works the same way. +% When switching from latex to pdflatex and vice-versa, the compiler may +% have to be run twice to clear warning/error messages. + + + + + + +% *** CITATION PACKAGES *** +% +%\usepackage{cite} +% cite.sty was written by Donald Arseneau +% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package +% \cite{} output to follow that of IEEE. Loading the cite package will +% result in citation numbers being automatically sorted and properly +% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using +% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's +% \cite will automatically add leading space, if needed. Use cite.sty's +% noadjust option (cite.sty V3.8 and later) if you want to turn this off. +% cite.sty is already installed on most LaTeX systems. Be sure and use +% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does +% not currently provide for hyperlinked citations. +% The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/ +% The documentation is contained in the cite.sty file itself. + + + + + + +% *** GRAPHICS RELATED PACKAGES *** +% +\ifCLASSINFOpdf + % \usepackage[pdftex]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../pdf/}{../jpeg/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.pdf,.jpeg,.png} +\else + % or other class option (dvipsone, dvipdf, if not using dvips). graphicx + % will default to the driver specified in the system graphics.cfg if no + % driver is specified. + % \usepackage[dvips]{graphicx} + % declare the path(s) where your graphic files are + % \graphicspath{{../eps/}} + % and their extensions so you won't have to specify these with + % every instance of \includegraphics + % \DeclareGraphicsExtensions{.eps} +\fi +% graphicx was written by David Carlisle and Sebastian Rahtz. It is +% required if you want graphics, photos, etc. graphicx.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/graphics/ +% Another good source of documentation is "Using Imported Graphics in +% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or +% epslatex.pdf at: http://www.ctan.org/tex-archive/info/ +% +% latex, and pdflatex in dvi mode, support graphics in encapsulated +% postscript (.eps) format. pdflatex in pdf mode supports graphics +% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure +% that all non-photo figures use a vector format (.eps, .pdf, .mps) and +% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats +% which can result in "jaggedy"/blurry rendering of lines and letters as +% well as large increases in file sizes. +% +% You can find documentation about the pdfTeX application at: +% http://www.tug.org/applications/pdftex + + + + + +% *** MATH PACKAGES *** +% +%\usepackage[cmex10]{amsmath} +% A popular package from the American Mathematical Society that provides +% many useful and powerful commands for dealing with mathematics. If using +% it, be sure to load this package with the cmex10 option to ensure that +% only type 1 fonts will utilized at all point sizes. Without this option, +% it is possible that some math symbols, particularly those within +% footnotes, will be rendered in bitmap form which will result in a +% document that can not be IEEE Xplore compliant! +% +% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000 +% thus preventing page breaks from occurring within multiline equations. Use: +%\interdisplaylinepenalty=2500 +% after loading amsmath to restore such page breaks as IEEEtran.cls normally +% does. amsmath.sty is already installed on most LaTeX systems. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/ + + + + + +% *** SPECIALIZED LIST PACKAGES *** +% +%\usepackage{algorithmic} +% algorithmic.sty was written by Peter Williams and Rogerio Brito. +% This package provides an algorithmic environment fo describing algorithms. +% You can use the algorithmic environment in-text or within a figure +% environment to provide for a floating algorithm. Do NOT use the algorithm +% floating environment provided by algorithm.sty (by the same authors) or +% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated +% algorithm float types and packages that provide these will not provide +% correct IEEE style captions. The latest version and documentation of +% algorithmic.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/ +% There is also a support site at: +% http://algorithms.berlios.de/index.html +% Also of interest may be the (relatively newer and more customizable) +% algorithmicx.sty package by Szasz Janos: +% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/ + + + + +% *** ALIGNMENT PACKAGES *** +% +%\usepackage{array} +% Frank Mittelbach's and David Carlisle's array.sty patches and improves +% the standard LaTeX2e array and tabular environments to provide better +% appearance and additional user controls. As the default LaTeX2e table +% generation code is lacking to the point of almost being broken with +% respect to the quality of the end results, all users are strongly +% advised to use an enhanced (at the very least that provided by array.sty) +% set of table tools. array.sty is already installed on most systems. The +% latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/required/tools/ + + +%\usepackage{mdwmath} +%\usepackage{mdwtab} +% Also highly recommended is Mark Wooding's extremely powerful MDW tools, +% especially mdwmath.sty and mdwtab.sty which are used to format equations +% and tables, respectively. The MDWtools set is already installed on most +% LaTeX systems. The lastest version and documentation is available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/ + + +% IEEEtran contains the IEEEeqnarray family of commands that can be used to +% generate multiline equations as well as matrices, tables, etc., of high +% quality. + + +%\usepackage{eqparbox} +% Also of notable interest is Scott Pakin's eqparbox package for creating +% (automatically sized) equal width boxes - aka "natural width parboxes". +% Available at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/ + + + + + +% *** SUBFIGURE PACKAGES *** +%\usepackage[tight,footnotesize]{subfigure} +% subfigure.sty was written by Steven Douglas Cochran. This package makes it +% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE +% work, it is a good idea to load it with the tight package option to reduce +% the amount of white space around the subfigures. subfigure.sty is already +% installed on most LaTeX systems. The latest version and documentation can +% be obtained at: +% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/ +% subfigure.sty has been superceeded by subfig.sty. + + + +%\usepackage[caption=false]{caption} +%\usepackage[font=footnotesize]{subfig} +% subfig.sty, also written by Steven Douglas Cochran, is the modern +% replacement for subfigure.sty. However, subfig.sty requires and +% automatically loads Axel Sommerfeldt's caption.sty which will override +% IEEEtran.cls handling of captions and this will result in nonIEEE style +% figure/table captions. To prevent this problem, be sure and preload +% caption.sty with its "caption=false" package option. This is will preserve +% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later +% (recommended due to many improvements over 1.2) of subfig.sty supports +% the caption=false option directly: +%\usepackage[caption=false,font=footnotesize]{subfig} +% +% The latest version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/ +% The latest version and documentation of caption.sty can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/ + + + + +% *** FLOAT PACKAGES *** +% +%\usepackage{fixltx2e} +% fixltx2e, the successor to the earlier fix2col.sty, was written by +% Frank Mittelbach and David Carlisle. This package corrects a few problems +% in the LaTeX2e kernel, the most notable of which is that in current +% LaTeX2e releases, the ordering of single and double column floats is not +% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a +% single column figure to be placed prior to an earlier double column +% figure. The latest version and documentation can be found at: +% http://www.ctan.org/tex-archive/macros/latex/base/ + + + +%\usepackage{stfloats} +% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e +% the ability to do double column floats at the bottom of the page as well +% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in +% LaTeX2e). It also provides a command: +%\fnbelowfloat +% to enable the placement of footnotes below bottom floats (the standard +% LaTeX2e kernel puts them above bottom floats). This is an invasive package +% which rewrites many portions of the LaTeX2e float routines. It may not work +% with other packages that modify the LaTeX2e float routines. The latest +% version and documentation can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/ +% Documentation is contained in the stfloats.sty comments as well as in the +% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE +% does not allow \baselineskip to stretch. Authors submitting work to the +% IEEE should note that IEEE rarely uses double column equations and +% that authors should try to avoid such use. Do not be tempted to use the +% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does +% not format its papers in such ways. + + +%\ifCLASSOPTIONcaptionsoff +% \usepackage[nomarkers]{endfloat} +% \let\MYoriglatexcaption\caption +% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}} +%\fi +% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg. +% This package may be useful when used in conjunction with IEEEtran.cls' +% captionsoff option. Some IEEE journals/societies require that submissions +% have lists of figures/tables at the end of the paper and that +% figures/tables without any captions are placed on a page by themselves at +% the end of the document. If needed, the draftcls IEEEtran class option or +% \CLASSINPUTbaselinestretch interface can be used to increase the line +% spacing as well. Be sure and use the nomarkers option of endfloat to +% prevent endfloat from "marking" where the figures would have been placed +% in the text. The two hack lines of code above are a slight modification of +% that suggested by in the endfloat docs (section 8.3.1) to ensure that +% the full captions always appear in the list of figures/tables - even if +% the user used the short optional argument of \caption[]{}. +% IEEE papers do not typically make use of \caption[]'s optional argument, +% so this should not be an issue. A similar trick can be used to disable +% captions of packages such as subfig.sty that lack options to turn off +% the subcaptions: +% For subfig.sty: +% \let\MYorigsubfloat\subfloat +% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}} +% For subfigure.sty: +% \let\MYorigsubfigure\subfigure +% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}} +% However, the above trick will not work if both optional arguments of +% the \subfloat/subfig command are used. Furthermore, there needs to be a +% description of each subfigure *somewhere* and endfloat does not add +% subfigure captions to its list of figures. Thus, the best approach is to +% avoid the use of subfigure captions (many IEEE journals avoid them anyway) +% and instead reference/explain all the subfigures within the main caption. +% The latest version of endfloat.sty and its documentation can obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/ +% +% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used +% later in the document, say, to conditionally put the References on a +% page by themselves. + + + + + +% *** PDF, URL AND HYPERLINK PACKAGES *** +% +%\usepackage{url} +% url.sty was written by Donald Arseneau. It provides better support for +% handling and breaking URLs. url.sty is already installed on most LaTeX +% systems. The latest version can be obtained at: +% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/ +% Read the url.sty source comments for usage information. Basically, +% \url{my_url_here}. + + + + + +% *** Do not adjust lengths that control margins, column widths, etc. *** +% *** Do not use packages that alter fonts (such as pslatex). *** +% There should be no need to do such things with IEEEtran.cls V1.6 and later. +% (Unless specifically asked to do so by the journal or conference you plan +% to submit to, of course. ) + + +% correct bad hyphenation here +\hyphenation{op-tical net-works semi-conduc-tor} + + +\begin{document} +% +% paper title +% can use linebreaks \\ within to get better formatting as desired +\title{Bare Demo of IEEEtran.cls for Journals} +% +% +% author names and IEEE memberships +% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break +% a structure at a ~ so this keeps an author's name from being broken across +% two lines. +% use \thanks{} to gain access to the first footnote area +% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks +% was not built to handle multiple paragraphs +% + +\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,} + John~Doe,~\IEEEmembership{Fellow,~OSA,} + and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space +\thanks{M. Shell is with the Department +of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, +GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space +\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space +\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}} + +% note the % following the last \IEEEmembership and also \thanks - +% these prevent an unwanted space from occurring between the last author name +% and the end of the author line. i.e., if you had this: +% +% \author{....lastname \thanks{...} \thanks{...} } +% ^------------^------------^----Do not want these spaces! +% +% a space would be appended to the last name and could cause every name on that +% line to be shifted left slightly. This is one of those "LaTeX things". For +% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get +% "AB" then you have to do: "\textbf{A}\textbf{B}" +% \thanks is no different in this regard, so shield the last } of each \thanks +% that ends a line with a % and do not let a space in before the next \thanks. +% Spaces after \IEEEmembership other than the last one are OK (and needed) as +% you are supposed to have spaces between the names. For what it is worth, +% this is a minor point as most people would not even notice if the said evil +% space somehow managed to creep in. + + + +% The paper headers +\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}% +{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Journals} +% The only time the second header will appear is for the odd numbered pages +% after the title page when using the twoside option. +% +% *** Note that you probably will NOT want to include the author's *** +% *** name in the headers of peer review papers. *** +% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if +% you desire. + + + + +% If you want to put a publisher's ID mark on the page you can do it like +% this: +%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE} +% Remember, if you use this you must call \IEEEpubidadjcol in the second +% column for its text to clear the IEEEpubid mark. + + + +% use for special paper notices +%\IEEEspecialpapernotice{(Invited Paper)} + + + + +% make the title area +\maketitle + + +\begin{abstract} +%\boldmath +The abstract goes here. +\end{abstract} +% IEEEtran.cls defaults to using nonbold math in the Abstract. +% This preserves the distinction between vectors and scalars. However, +% if the journal you are submitting to favors bold math in the abstract, +% then you can use LaTeX's standard command \boldmath at the very start +% of the abstract to achieve this. Many IEEE journals frown on math +% in the abstract anyway. + +% Note that keywords are not normally used for peerreview papers. +\begin{IEEEkeywords} +IEEEtran, journal, \LaTeX, paper, template. +\end{IEEEkeywords} + + + + + + +% For peer review papers, you can put extra information on the cover +% page as needed: +% \ifCLASSOPTIONpeerreview +% \begin{center} \bfseries EDICS Category: 3-BBND \end{center} +% \fi +% +% For peerreview papers, this IEEEtran command inserts a page break and +% creates the second title. It will be ignored for other modes. +\IEEEpeerreviewmaketitle + + + +\section{Introduction} +% The very first letter is a 2 line initial drop letter followed +% by the rest of the first word in caps. +% +% form to use if the first word consists of a single letter: +% \IEEEPARstart{A}{demo} file is .... +% +% form to use if you need the single drop letter followed by +% normal text (unknown if ever used by IEEE): +% \IEEEPARstart{A}{}demo file is .... +% +% Some journals put the first two words in caps: +% \IEEEPARstart{T}{his demo} file is .... +% +% Here we have the typical use of a "T" for an initial drop letter +% and "HIS" in caps to complete the first word. +\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file'' +for IEEE journal papers produced under \LaTeX\ using +IEEEtran.cls version 1.7 and later. +% You must have at least 2 lines in the paragraph with the drop letter +% (should never be an issue) +I wish you the best of success. + +\hfill mds + +\hfill January 11, 2007 + +\subsection{Subsection Heading Here} +Subsection text here. + +% needed in second column of first page if using \IEEEpubid +%\IEEEpubidadjcol + +\subsubsection{Subsubsection Heading Here} +Subsubsection text here. + + +% An example of a floating figure using the graphicx package. +% Note that \label must occur AFTER (or within) \caption. +% For figures, \caption should occur after the \includegraphics. +% Note that IEEEtran v1.7 and later has special internal code that +% is designed to preserve the operation of \label within \caption +% even when the captionsoff option is in effect. However, because +% of issues like this, it may be the safest practice to put all your +% \label just after \caption rather than within \caption{}. +% +% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class +% option should be used if it is desired that the figures are to be +% displayed while in draft mode. +% +%\begin{figure}[!t] +%\centering +%\includegraphics[width=2.5in]{myfigure} +% where an .eps filename suffix will be assumed under latex, +% and a .pdf suffix will be assumed for pdflatex; or what has been declared +% via \DeclareGraphicsExtensions. +%\caption{Simulation Results} +%\label{fig_sim} +%\end{figure} + +% Note that IEEE typically puts floats only at the top, even when this +% results in a large percentage of a column being occupied by floats. + + +% An example of a double column floating figure using two subfigures. +% (The subfig.sty package must be loaded for this to work.) +% The subfigure \label commands are set within each subfloat command, the +% \label for the overall figure must come after \caption. +% \hfil must be used as a separator to get equal spacing. +% The subfigure.sty package works much the same way, except \subfigure is +% used instead of \subfloat. +% +%\begin{figure*}[!t] +%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}% +%\label{fig_first_case}} +%\hfil +%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}% +%\label{fig_second_case}}} +%\caption{Simulation results} +%\label{fig_sim} +%\end{figure*} +% +% Note that often IEEE papers with subfigures do not employ subfigure +% captions (using the optional argument to \subfloat), but instead will +% reference/describe all of them (a), (b), etc., within the main caption. + + +% An example of a floating table. Note that, for IEEE style tables, the +% \caption command should come BEFORE the table. Table text will default to +% \footnotesize as IEEE normally uses this smaller font for tables. +% The \label must come after \caption as always. +% +%\begin{table}[!t] +%% increase table row spacing, adjust to taste +%\renewcommand{\arraystretch}{1.3} +% if using array.sty, it might be a good idea to tweak the value of +% \extrarowheight as needed to properly center the text within the cells +%\caption{An Example of a Table} +%\label{table_example} +%\centering +%% Some packages, such as MDW tools, offer better commands for making tables +%% than the plain LaTeX2e tabular which is used here. +%\begin{tabular}{|c||c|} +%\hline +%One & Two\\ +%\hline +%Three & Four\\ +%\hline +%\end{tabular} +%\end{table} + + +% Note that IEEE does not put floats in the very first column - or typically +% anywhere on the first page for that matter. Also, in-text middle ("here") +% positioning is not used. Most IEEE journals use top floats exclusively. +% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom +% floats. This can be corrected via the \fnbelowfloat command of the +% stfloats package. + + + +\section{Conclusion} +The conclusion goes here. + + + + + +% if have a single appendix: +%\appendix[Proof of the Zonklar Equations] +% or +%\appendix % for no appendix heading +% do not use \section anymore after \appendix, only \section* +% is possibly needed + +% use appendices with more than one appendix +% then use \section to start each appendix +% you must declare a \section before using any +% \subsection or using \label (\appendices by itself +% starts a section numbered zero.) +% + + +\appendices +\section{Proof of the First Zonklar Equation} +Appendix one text goes here. + +% you can choose not to have a title for an appendix +% if you want by leaving the argument blank +\section{} +Appendix two text goes here. + + +% use section* for acknowledgement +\section*{Acknowledgment} + + +The authors would like to thank... + + +% Can use something like this to put references on a page +% by themselves when using endfloat and the captionsoff option. +\ifCLASSOPTIONcaptionsoff + \newpage +\fi + + + +% trigger a \newpage just before the given reference +% number - used to balance the columns on the last page +% adjust value as needed - may need to be readjusted if +% the document is modified later +%\IEEEtriggeratref{8} +% The "triggered" command can be changed if desired: +%\IEEEtriggercmd{\enlargethispage{-5in}} + +% references section + +% can use a bibliography generated by BibTeX as a .bbl file +% BibTeX documentation can be easily obtained at: +% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/ +% The IEEEtran BibTeX style support page is at: +% http://www.michaelshell.org/tex/ieeetran/bibtex/ +%\bibliographystyle{IEEEtran} +% argument is your BibTeX string definitions and bibliography database(s) +%\bibliography{IEEEabrv,../bib/paper} +% +% manually copy in the resultant .bbl file +% set second argument of \begin to the number of references +% (used to reserve space for the reference number labels box) +\begin{thebibliography}{1} + +\bibitem{IEEEhowto:kopka} +H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus + 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999. + +\end{thebibliography} + +% biography section +% +% If you have an EPS/PDF photo (graphicx package needed) extra braces are +% needed around the contents of the optional argument to biography to prevent +% the LaTeX parser from getting confused when it sees the complicated +% \includegraphics command within an optional argument. (You could create +% your own custom macro containing the \includegraphics command to make things +% simpler here.) +%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell} +% or if you just want to reserve a space for a photo: + +\begin{IEEEbiography}{Michael Shell} +Biography text here. +\end{IEEEbiography} + +% if you will not have a photo at all: +\begin{IEEEbiographynophoto}{John Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% insert where needed to balance the two columns on the last page with +% biographies +%\newpage + +\begin{IEEEbiographynophoto}{Jane Doe} +Biography text here. +\end{IEEEbiographynophoto} + +% You can push biographies down or up by placing +% a \vfill before or after them. The appropriate +% use of \vfill depends on what kind of text is +% on the last page and whether or not the columns +% are being equalized. + +%\vfill + +% Can be used to pull up biographies so that the bottom of the last one +% is flush with the other column. +%\enlargethispage{-5in} + + + +% that's all folks +\end{document} + +