robin/Robin_PHD
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

getting very sleepy vision a bit blurred

Browse Source
This commit is contained in:
Robin Clark 2013-09-26 23:22:25 +01:00
parent 7d8832df44
commit bda19ba4d7
3 changed files with 6 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
submission_thesis/CH5_Examples/copy.tex
View File

@ -1864,7 +1864,7 @@ a narrow temperature range, being mounted on a PCB.
%\glossary{{PCB}{Printed Circuit Board}}
%
To calculate the resistance of the Pt100 element % (and thus derive its temperature),
the voltage over it---i.e. $ sense+ \; - \; sense-$---is read
the voltage over it, i.e. sense+ minus sense-, is read
and with the current flowing through it, its resistance can be found.
%must be measured.
%
@ -2020,7 +2020,7 @@ for the circuit shown in figure \ref{fig:vd}.
\paragraph{Proof of Out of Range Values for Failures.}
\label{pt110range}
%
Using the temperature ranges defined above the voltages read can be used to verify correct operation of the circuit;
Using the temperature ranges defined above the voltages calculated can be used to verify correct operation of the circuit;
it is shown that the resistor failures, OPEN and SHORT, would cause
`out~of~range' voltages.
%

3
submission_thesis/appendixes/algorithmic.tex
View File

@ -630,7 +630,8 @@ component created in the next stage.
}
{
Ensuring that no result belongs to more than one symptom
set enforces the `unitary state failure mode constraint' for derived components (see section~\ref{sec:unitarystate}).
%set <-------------------------------------------- HOW did the word set get in here!!!!!!!! Totally screwed up the meaning 26SEP2013
enforces the `unitary state failure mode constraint' for derived components (see section~\ref{sec:unitarystate}).
}
\fmmdgloss
%% Interesting to draw a graph here.

3
submission_thesis/appendixes/detailed_analysis.tex
View File

@ -589,7 +589,8 @@ FMMD analysis tables from chapter~\ref{sec:chap6}.
FC4: $RADC_{LOW}$ & ADC may read & $VOLTAGE\_LOW$ \\ \hline
FC4: $RADC_{LOW}$ & voltage value & $VOLTAGE\_LOW$ \\
& from ADC value low & \\ \hline
FC5: post condition fails & software failure & $VAL\_ERR$ \\
in function read\_ADC & read\_ADC & \\ \hline