FMMD making it clearer (I hope).

presentations/fmea/fmea_pres.tex

@@ -563,21 +563,32 @@ This creates an analysis hierarchy.
 \end{frame}
 
 
-\subsection{example}
+\subsection{FMMD Outline of Methodology}
 \begin{frame}
-\frametitle{FMMD - Example}
-We can take groups of components that perform a well defined task, and analyse their failure mode behaviour.
-We can call these `{\fgs}'.
-
-If we analyse the failure mode behaviour of a {\fg} we can determine how it will fail, or its symptoms of failure.
-We can represent this by a '{\dc}', where its failure modes are the symptoms of the {\fg} it was derived from.
+\frametitle{FMMD - Outline of Methodology}
+\begin{itemize}
+  \pause \item Select `{\fgs}' of components ( groups that perform a well defined function).
+   \pause \item Analyse the failure mode behaviour of a {\fg}. 
+   \pause \item  Collect the failures into Symptoms.
+  \pause \item  Create a '{\dc}', where its failure modes are the symptoms of the {\fg} it was derived from.
+ \pause \item The {\dc} is now available to be used in higher level {\fgs}.
+\end{itemize}
 \end{frame}
 
+
+
+\subsection{example}
 \begin{frame}
-\frametitle{FMMD - Example}
+\frametitle{FMMD - Example - Milli Volt Amplifier}
 We can begin to analyse this by looking for functional groups.
 The resistors would together to perform a fairly common function in electronics, that of the potential divider.
-We can now take the failure modes for the resistors (OPEN and SHORT EN298) and see what effect each of these failures will have on the {\fg}
+We can now take the failure modes for the resistors (OPEN and SHORT EN298) and see what effect each of these failures will have on the {\fg}.
+\begin{figure}
+ \centering
+ \includegraphics[width=100pt]{./mvampcircuit.png}
+ % mvampcircuit.png: 243x143 pixel, 72dpi, 8.57x5.04 cm, bb=0 0 243 143
+\end{figure}
+
 \end{frame}