From 88347a8ef0efeda5f11e5a980330b949ace46cb2 Mon Sep 17 00:00:00 2001
From: Robin Clark <r.clark@energytechnologycontrol.com>
Date: Thu, 4 Nov 2010 09:24:36 +0000
Subject: [PATCH] fleshing out skeleton chapter

---
 lifecycle_modelling/lifecycle_modelling.tex | 60 +++++++++++++++++++--
 1 file changed, 57 insertions(+), 3 deletions(-)

diff --git a/lifecycle_modelling/lifecycle_modelling.tex b/lifecycle_modelling/lifecycle_modelling.tex
index e0b1582..e1e99bf 100644
--- a/lifecycle_modelling/lifecycle_modelling.tex
+++ b/lifecycle_modelling/lifecycle_modelling.tex
@@ -8,12 +8,36 @@
 This paper describes how the FMMD methodology 
 can be applied throughout the lifecycle of a product,
 with minimal impact to the cost of re-analysis.
+% what I did
+Looking at SYSTEMS ENGINEERING concepts.
+FMMD static design analysis tool, but can be applied to product life cycle
+Becomes a living analysis tool
+% what I found
+ Alterations required in a failure mode model arise from
+new failure modes discovered in base components, new failure mode behaviour observed
+in {\dc}s, and environmantal effects found that interact with the failure mode model.
+% conclusion
+FMMD analysis can be updated with these three effects
+and we can apply procedures that will automaically force
+the uncoverig of new possible SYSTEM failure modes.
 }
 }
 {
 This chapter describes how the FMMD methodology 
 can be applied throughout the lifecycle of a product,
 with minimal impact to the cost of re-analysis.
+% what I did
+Looking at SYSTEMS ENGINEERING concepts.
+FMMD static design analysis tool, but can be applied to product life cycle
+Becomes a living analysis tool
+% what I found
+ Alterations required in a failure mode model arise from
+new failure modes discovered in base components, new failure mode behaviour observed
+in {\dc}s, and environmantal effects found that interact with the failure mode model.
+% conclusion
+FMMD analysis can be updated with these three effects
+and we can apply procedures that will automaically force
+the uncoverig of new possible SYSTEM failure modes.
 }
 
  
@@ -22,12 +46,21 @@ with minimal impact to the cost of re-analysis.
 \ifthenelse {\boolean{paper}}
 {
 paper
+
+THIS IS THE PAPER VERSION OF THE CHAPTER
+
+QUICK DESCRIPTION OF FMMD
+
 }
 {
 chapter
+THIS IS THE CHAPTER IN THESIS VERSION OF THE CHAPTER
 }
 
-\section{discovering a `new' failure mode in a component}
+\section{Three sources of Alteration/addition to the FMMD Model}
+
+
+\subsection{discovering a `new' failure mode in a component}
 
 Give general idea of how a new failure mode can be integrated into the model.
 
@@ -46,6 +79,27 @@ But when combined with high value resistors could give incorrect voltage reading
 I how the FMMD model can have this new failure mode added and what
 impact it has on the FMMD data model.
 
-\section{Discovering New Failure Mode behaviour ina {\dc}}
+\subsection{Discovering New Failure Mode behaviour in a {\dc}}
+
+Ref Nacy Leveson, system eng.
+
+A sub-system or system has its own behaviour etc
+
+These may be traced to combinations of afailure modes
+but may be undiscovered in initial analysis.
+
+
+\subsection{New or additional evironmental Conditions}
+
+
+
+An environmental effect may be found to affect a sub-system.
+Show how this vcan be retro fitted into a working/live FMMD model.
+
+\section{Conclusion}
+
+Product Life cycle phases for FMMD
+
+
+
 
-\section{New or additional evironmental Conditions}