work on this at home before juggling

opamp_circuits_C_GARRETT/opamps.tex

@@ -30,6 +30,24 @@ Function $fm$ applied to a component returns its failure modes.
 \listoffigures  
 
 
+
+\section{Non Inverting OPAMP}
+Consider a non inverting op-amp designed to amplify
+a small positive voltage, typical use would be a thermocouple.
+
+
+\section{Inverting OPAMP}
+This configuration is interesting from methodology perspective.
+There are two ways in which we can tackle this.
+One is to do this in two stages, by considing the gain resistors to be a potential divider
+and then combining the poential divider with the OPAMP failure mode model.
+The other way is to place all three components in a {\fg}.
+
+\subsection{Inverting OPAMP using a Potential Divider {\dc}}
+ 
+\subsection{Inverting OPAMP using three components}
+
+
 \clearpage
 \section{Op-Amp circuit 1}