robin/Robin_PHD
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

After first proof read of minor corrections

Browse Source
This commit is contained in:
Robin Clark 2013-12-21 13:36:09 +00:00
parent 3bbb4215a5
commit 473bbebdb1
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
submission_thesis/CH5_Examples/copy.tex
View File

@ -84,7 +84,7 @@ output voltage above or equal to zero would be erroneous i.e. an `$AMP_{HIGH}$'
A threshold would be determined for an `$AMP_{LOW}$' failure symptom (i.e. the output voltage more negative than expected). % error given the expected input range. A threshold would be determined for an `$AMP_{LOW}$' failure symptom (i.e. the output voltage more negative than expected). % error given the expected input range.
% %
%This configuration is interesting from methodology pers. %This configuration is interesting from methodology pers.
Following the guidelines for the FMMD process (see section~\ref{fmmdguide}), initially potential {\fgs} are identified. Following the guidelines for the FMMD process (see section~\ref{fmmdguide}), initial potential {\fgs} are identified.
% %
There are two obvious ways in which this circuit can be modelled. There are two obvious ways in which this circuit can be modelled.
% %
@ -735,7 +735,7 @@ This FMMD analysis also revealed an undetectable failure mode, $DiffAMPIncorrec
The circuit in figure~\ref{fig:circuit2} shows a five pole low pass filter. The circuit in figure~\ref{fig:circuit2} shows a five pole low pass filter.
% %
Using the FMMD guidelines~\ref{fmmdguide}, a top down view of the circuit is taken, and then groups of components Using the FMMD guidelines (see section ~\ref{fmmdguide}), a top down view of the circuit is taken, and then groups of components
performing specific tasks are identified. performing specific tasks are identified.
% %
Starting at the input, there is a first order low pass filter buffered by an op-amp, Starting at the input, there is a first order low pass filter buffered by an op-amp,
@ -1092,7 +1092,7 @@ hence a fault anywhere in the loop is likely to affect all stages.
However, this is not a problem for FMMD, as {\fgs} are readily identifiable. However, this is not a problem for FMMD, as {\fgs} are readily identifiable.
% %
% %
Using the FMMD guidelines~\ref{fmmdguide}, a top down view of the circuit is taken, and then groups of components Using the FMMD guidelines (see section~\ref{fmmdguide}), a top down view of the circuit is taken, and then groups of components
performing specific tasks are identified. performing specific tasks are identified.
% %
%The signal path is circular (its a positive feedback circuit) and most failures would simply cause the output to stop oscillating. %The signal path is circular (its a positive feedback circuit) and most failures would simply cause the output to stop oscillating.